Purchase Replacement Keyless Entry Remote Transmitter(complete Remote) 1. Start with Key out of ignition. 2. Locate bulb failure warning module in trunk near LH hinge and disconnect multi-plug. 3. Jump bulb failure warning module harness multi-plug terminals 2 and 10: System should now lock and unlock vehicle once and activate truck lock to confirm. 4. Press any button on keyless remote: System should now lock and unlock vehicle once and activate trunk lock to confirm. 5. Press any button on second keyless remote if applicable: System should now lock and unlock vehicle once and activate trunk lock to confirm. 6. To exit programming mode remove jumper wire from mulit-plug. reconnect multi-plug to original connection. 7. Test remote(s). ** A maximum of 2 keyless remotes can be programmed. ** Programming a keyless remote erases all other keyless remotes. Both keyless remotes must be programmed at the same time.
